
Product Details
Details
Overview
Tannoy CMS801-BM-SUB
Compact 8" Blind-Mount Ceiling Subwoofer
Compact 8" blind mount ceiling subwoofer with integral back can designed to compliment the CMS / CVS range. 160Hz Passive crossover built-in.
60W 70V(US)-100V(UK/EU) transformer with 15W/30W/60W tappings. (packed in pairs)
CMS (SUBWOOFERS)
A range of in-ceiling subwoofers providing options designed to deliver low frequency reinforcement to any Tannoy ceiling speaker installation. With both active and passive units available these designs are optimised for tight and controlled bass extension delivered with authority and agility in a wide range of applications.
CMS 801BM-sub
The Tannoy CMS801 ceiling subwoofer is a compact unit that is specifically designed to complement the full range CMS ceiling monitor systems; delivering low frequency extension into applications that require a combination of premium sonic quality and output level for music and speech reinforcement.
The 200mm (8.00") driver with long throw multi fibre paper pulp cone and a 2nd order 160Hz passive crossover are mounted in a vented injection moulded paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
Spring loaded self-aligning clamps make for quick and easy installation while both the BM and PI models are also supplied with two tile support rails and one C-ring included in the package. A plaster (mud) ring is available as an optional accessory.
Equipped with a low insertion loss 60W line transformer mounted within the back can. This is easily configurable to the following settings via front baffle mounted rotary tapping switch:
70V systems: 60W / 30W / 15W / 7.5W / OFF & low Impedance operation
100V systems: 60W / 30W / 15W / OFF & low Impedance operation
Specifications
Model | CMS 801sub | |
PERFORMANCE | ||
Frequency Response (-3 dB) (1) | 58 Hz - 160 Hz | |
Frequency Range (-10 dB) (1) | 42 Hz - 300 Hz | |
System Sensitivity (1 W @ 1 m) (2) | 92 dB (1 W = 2.45 V for 8 Ohms) | |
Crossover | Integral 2nd order passive, 160 Hz | |
Rated Maximum SPL (2) | Average: 112 dB Peak: 118 dB Average (with THP60): 110 dB |
|
Power Handling | Average: 100 W Programme: 200 W Peak: 400 W |
|
Recommended Amplifier Power | 200 W @ 6 Ohms | |
Nominal Impedance | 6 Ohms | |
Transformer Taps (via front rotary switch) | 70 V: 60 W / 30 W / 15 W / 7.5 W / OFF & low impedance operation 100 V: 60 W / 30 W / 15 W / OFF & low impedance operation |
|
DISTORTION | ||
10% Full Power (21.9 V) | 2nd Harmonic 70 Hz: 1.22%, 100 Hz: 0.38% 3rd Harmonic 70 Hz: 1.90%, 100 Hz: 0.49% |
|
1% Full Power (2.45 V) | 2nd Harmonic 70 Hz: 0.91%, 100 Hz: 0.04% 3rd Harmonic 70 Hz: 1.28%, 100 Hz: 0.44% |
|
TRANSDUCERS | ||
Transducer | 1 x 200 mm (8.00") Long throw woofer with multi fibre paper pulp cone | |
PHYSICAL | ||
Enclosure | Back Can: Zinc plated steel Baffle: Reflex loaded UL 94 V-0 rated ABS Grille: Steel, with weather resistant coating |
|
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond | |
Clamping Design | Security toggle clamp Min / Max Clamping Range: 0.0mm (0.0") / 20.0mm (0.79") Recommended Clamp Torque: 1.5Nm |
|
BackCan Options | Blind Mount (BM): Complete with fixed back can Pre Install (PI): Separate back can for pre installation |
|
Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm | |
Conduit Knockouts | 3 Sets of horizontal positions: 19 / 22 / 28 mm (0.75" / 0.87" / 1.10") | |
Connectors | Removable locking connector with screw terminals with "loop through" facility | |
Safety Agency Ratings | UL-1480, UL-2043, CE | |
Hole cutout diameter (all models) | 295 mm (11.61") | |
Dimensions | Bezel Diameter: 325 mm (12.80") | |
BM Model | Front of ceiling to rear of backcan: 310.5 mm (12.22") Front of ceiling to top of safety loop: 327.7 (12.90") |
|
PI Model | Front of ceiling surface to rear of speaker unit: 117.5 mm (4.63") Front of accessory backcan bezel to top of safety loop: 168.5 mm (6.63") |
|
Net Weight (ea) | CMS 801Sub BM: 6.3 kg (13.89 lbs) CMS 801Sub PI: 3.2 kg (7.05 lbs) PI Backcan: 4 kg (8.11 lbs) |
|
Included Accessories | C Ring Tile bridge Paint mask Cutout template Grille |
|
Optional Accessories | Plaster (mud) ring |