Radio Design Labs RDL-FP-MR2

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Radio Design Labs

Product SKU: RDL-FP-MR2

Overview The FP-MR2 is a message repeater that permits electronic storage of a single recording up to one minute forty seconds in duration. This message may be played back manually using an external contact closure to ground or using the...


Login for Price

DISCLAIMER

ATTENTION! TARIFFS AND INDUSTRY IMPACT: All Pricing is subject to change without notice due to industry wide Tariff increases with several major manufacturers. Please check with your sales rep for current and updated pricing information prior to ordering. Quotes are only valid for the day they are provided. Returns for credit - New product may be approved to be returned for credit within 30 days of original packaging. Product must be new, unopened and in original packaging Returns and canceled orders are subject to a 25% restocking fee. -MANY ITEMS ARE CURRENTLY ON BACKORDER. PLEASE VERIFY PRICING AND AVAILABILITY ON ALL PRODUCTS WITH YOUR SALES REP VIA CHAT, EMAIL, OR PHONE BEFORE PLACING AN ORDER

Product Details

Overview

The FP-MR2 is a message repeater that permits electronic storage of a single recording up to one minute forty seconds in duration. This message may be played back manually using an external contact closure to ground or using the front-panel START button. The message may also be played back periodically using the interval timer included in the FP-MR2. A balanced line-level music input allows background music to be connected and the associated input potentiometer allows the installer to set the music level. When message playback is triggered, the music is faded down. At the conclusion of the message, the music level fades back up. A front-panel DIP switch sets the music to fade under the message (-20 dB nominal) or completely off (used for messages containing music). The module output level is a nominal +4 dBu balanced. The output level is indicated on an RDL dual-LED VU meter which is used to set the proper music and recording levels.

The message may be recorded once, at installation, then played back repeatedly. The message may be re-recorded at any time and is retained when power is removed from the module. The recording input is a standard -10 dBV consumer level unbalanced phono jack. An input level trimmer is provided to set the correct recording level which is indicated on the dual LED meter. The front-panel RECORD ENABLE pushbutton erases the message in memory and enables recording, indicated by the RECORD ENABLE LED. The module begins recording when the START button is pushed and continues until the button is released. The REC LED is illuminated during recording. An integral audio compressor maintains a consistent average recording level over 20 dB input of level variation without significant audible effect on the signal dynamics.

Features

  • Repeating Single Message
  • Music Quality Message Recording
  • Up to 1.7 Minute Digital Message Storage
  • External Message Actuation
  • Interval Timer to Repeat Message Playback
  • Background Music Input
  • Automatic Voice-Over or Music Ducking

Specifications


Recording Input:
Input 10 k? unbalanced
Input Level -20 dBV to 0 dBV
Frequency Response 80 Hz to 12 kHz (± 1.5 dB)
Noise below +4 dBu < -65 dB

Music Input:
Input 50 k? balanced or unbalanced
Input Level (for +4 dBu out) -18 dBu bal. (-20 dBV unbal.) to +18 dBu bal. (+16 dBV unbal.)
Frequency Response 30 Hz to 40 kHz (± 1 dB)
THD+N < 0.05% (1 kHz)
Noise below +4 dBu < -70 dB (unity gain)
CMRR >70 dB (50 to 150 Hz)
Output 150 ? balanced or 75 ? unbal.
Output Level +4 dBu nominal
Control Inputs (2) TRIG and DISABLE, Pull to ground, 1 mA
Control Outputs (2) PLAYING and EOM, Open-collector @ 25 mA
Ambient Operating Environment 0° C to 55° C
Power Requirement 24 Vdc @ 60 mA, Ground-referenced
Dimensions Height: 1.36 in. 3.46 cm; Width: 3.25 in. 8.26 cm; Length: 5.0 in. 12.7 cm
Package Type Cardboard Box
Package Dimensions 4.375 x 7 x 2.25 in.
Shipping Weight 0.87 lbs.
WEEE weight 0.64 lbs.
Tariff code 8519.81.3000
Loading...

Your cart