DISCLAIMER
ATTENTION! TARIFFS AND INDUSTRY IMPACT: All Pricing is subject to change without notice due to industry wide Tariff increases with several major manufacturers. Please check with your sales rep for current and updated pricing information prior to ordering. Quotes are only valid for the day they are provided. Returns for credit - New product may be approved to be returned for credit within 30 days of original packaging. Product must be new, unopened and in original packaging Returns and canceled orders are subject to a 25% restocking fee. -MANY ITEMS ARE CURRENTLY ON BACKORDER. PLEASE VERIFY PRICING AND AVAILABILITY ON ALL PRODUCTS WITH YOUR SALES REP VIA CHAT, EMAIL, OR PHONE BEFORE PLACING AN ORDERProduct Details
Overview
Original Reamp Circuit
The Reamp® JCR is a high-performance passive Reamper that gives you the ability to take a pre-recorded track and send it through a guitar amp or pedal chain, allowing you to explore new sonic textures and experiment with microphone placement, amp and pedal settings without limit. The JCR utilizes the original Reamp circuit designed by recording industry legend John Cuniberti, providing exceptional audio quality that preserves every detail of the original recording while optimizing it to feed amplifiers and effects pedals.
Features
- Lets you re-record tracks through a guitar or bass amp
- Original Reamp® circuit designed by John Cuniberti
- Plug and play easy to use passive design
- Improves productivity while expanding creative options
Play now, perfect later
The Radial Reamp JCR is the latest version of the original Reamp that was designed and patented by John Cuniberti. It features a 100% passive design with John's original custom wound 'Made in the USA' transformer and circuit. The latest Radial version features separate XLR and ¼" TRS input connectors, variable output level plus a three-position filter that lets you tame excessive highs, warm up the lows or simply bypass if you want to revert to the original circuit. An on-board mute function has also been added to allow you to shut off the signal going to the amps when making adjustments or moving mics around the studio.
JCR Applications
Reamping Part 1
Reamping usually starts by recording a dry clean track. The Radial J48 is an excellent choice for this as it presents the guitar with an ideal impedance for natural tone.
Reamping Part 2
Once the dry track is recorded, send it back to the Reamp JCR where it can feed a guitar or bass amplifier. Mic the amp to capture the new tone. Move the mic around to find the sweet spot.
Adding Pedals
Take things one step further by introducing effects pedals into the mix. Try a wah pedal on kick drum; envelope on snare; distortion on a vocal track. Let your imagination run free!
Specifications
| Audio circuit type: | Passive, transformer isolated | |
| Frequency response: | 20Hz ~ 20kHz (+0dB/-1dB) | |
| Dynamic range: | 140dB | |
| Total harmonic distortion: | 0.001% @ 1kHz/0dBu input | |
| Intermodulation Distortion: | 0.0025% @ 1kHz/-10dB input | |
| Phase Deviation: | 2º @ 100Hz; 0º @ 800Hz | |
| Input Impedance: | 1800 Ohms | |
| Output Impedance: | 4.8k Ohms | |
| Common Mode Rejection Ratio: | -55dB @ 55Hz | |
| Noise: | -115dBu | |
| Maximum Input: | +26dBu | |
| Features | ||
| 180° polarity reverse, Ground lift, HPF, LPF, Level Control | ||
| Input Connectors: | 1/4" TRS, XLR | |
| Output Connectors: | 1/4" unbalanced | |
| General | ||
| Construction: | 14-gauge steel chassis & outer shell | |
| Size (L x W x D): | 3.3" x 5.0" x 2" (84 x 127 x 48mm) | |
| Weight: | 1.32lb (600g) | |
| Shipping size (L x W x D): | 4" x 3" x 6.5" (102 x 76 x 165mm) | |
| Shipping weight: | 1.85lb (840g) | |
| Power: | Passive, no power required | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |
