QSC AD-S112-SW

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: QSC

Product SKU:

Details AD-S112SW AcousticDesign™ series offers integrators a premium quality installed sound solution where performance, coverage, and aesthetics are paramount. Combined with unprecedented ease-of-installation and high weather resistance, the AcousticDesign™ series provides integrators a versatile and confident install solution over a...


Login for Price

Product Details

Details

AD-S112SW

AcousticDesign™ series offers integrators a premium quality installed sound solution where performance, coverage, and aesthetics are paramount. Combined with unprecedented ease-of-installation and high weather resistance, the AcousticDesign™ series provides integrators a versatile and confident install solution over a wide variety of foreground and background sound reinforcement applications.

Consistent and even axisymmetric coverage is achieved through DMT™ (Directivity Matched Transition), a QSC innovation which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point. The result is a coherent transition between transducers and improved off-axis response.

AcousticDesign™ models with (T) suffix feature low-loss, low-saturation transformers with selectable taps, including an 8? bypass. To enhance weather resistance, the rotary selector is located on the back of the enclosure, protected by a weather grommet.

With rugged ABS enclosures, sealed input panel covers, and powder-coated aluminum grilles for weather resistance, the AcousticDesign™ surface mounted series exceed IEC60529 IP-54 ratings for dust and splash resistance.

Installers will appreciate the award-winning X-Mount™ system included with each full-range AcousticDesign™ model. This ingenious mounting solution achieves unprecedented ease-of-installation in horizontal, vertical, wall, or ceiling deployments. Knurled surfaces at the pivot planes ensure the load will not drift or sag over time.  Articulation marks allow pre-configuration of the X-Mount™ while on the ground with no special tools required. Once secure, the loudspeaker installs in seconds, allowing the installer to work safer, smarter, and faster with repeatable results.

To further enhance performance and speed of install with optimum result, advanced voicing filter sets using QSC Intrinsic Correction™ techniques are obtainable using Q-Sys networked audio processing platforms, including CXD amplifiers for a complete QSC systems solution.

The AcousticDesign™ series feature a stylish appearance free of obtrusive logo adornments for aesthetically sensitive installations. Complimenting adjacent product families, AcousticDesign™ surface loudspeakers are available in QSC standard black (RAL 9011) or white (RAL 9010) and may be painted to match any decor.

To assist in successful systems integration, EASE, CF2, CAD, and BIM files are available for download.

Speaker:
12"
Rated power continuous / peak / rms voltage:
300 W / 1200 W / 49 V
Impedance:
8?
Peak SPL:
121 dB

Features:

  • 12” weather treated woofer
  • TFR™ (Turbulent Flow Reduction) port provides optimal resonant tuning and high velocity air flow
  • Maximum peak SPL 121 dB
  • Suggested filter points: 32 Hz high-pass, 24 dB/octave Butterworth; 100 Hz low-pass, 24 dB/octave Butterworth
  • Included YMS12 yoke mount maximizes boundary plane coupling while reducing vibration transmission 
  • Optional M10 Kit-C for additional installation versatility 
  • Lightweight ABS enclosures offer long-term durability and lasting good looks
  • Sealed input panel cover and powder coated aluminum grilles for added weather resistance
  • Meets IEC60529 IP-54 for dust and splash resistance
  • Available in black (RAL 9011)
  • Complete EASE, CF2, CAD, and BIM information available online

Specifications:

System Details AD-S4T AD-S6T AD-S8T AD-S10T
Effective frequency range1 68 Hz to 20 kHz 60 Hz to 20 kHz 55 Hz to 20 kHz 50 Hz to 19 kHz
Rated noise power / voltage2 50 watts / 20 volts (rms) 150 watts / 35 volts (rms) 200 watts / 40 volts (rms) 250 watts / 45 volts (rms)
Broadband sensitivity3 87 dB SPL 89 dB SPL 90 dB SPL 92 dB SPL
Coverage angle (-6 dB) 120° 105° 105° 90°
Directivity factor (Q) 6 5 7 10
Directivity Index 8 dB 7 dB 9 dB 10 dB
Maximum continuous SPL4 104 dB 110 dB 113 dB 116 dB
Maximum peak SPL4 110 dB 116 dB 119 dB 122 dB
Rated impedance 8 ohms 8 ohms 8 ohms 8 ohms
Recommended amplifier power (loudspeaker "program" power) 100 watts 300 watts 400 watts 500 watts
Transformer taps 70 V: 30, 15, 7.5, 3.75 W and 8? bypass

100V: 30, 15, 7.5 W and 8? bypass
70 V: 60, 30, 15, 7.5 W and 8? bypass

100V: 60, 30, 15 W and 8? bypass
70 V: 60, 30, 15, 7.5 W and 8? bypass

100V: 60, 30, 15 W and 8? bypass
70 V: 100, 50, 25, 12.5 W and 8? bypass

100V: 100, 50, 25 W and 8? bypass
HF transducer 0.75” silk dome tweeter / 0.75” voice coil, horn loaded 1” silk dome tweeter / 1” voice coil, horn loaded 1” exit / 1.4” voice coil compression driver 1” exit / 1.4” voice coil compression driver
LF transducer 4” weather resistant paper cone woofer

1” / 25 mm voice coil
6” weather resistant paper cone woofer

1.5” / 38 mm voice coil
8” weather resistant paper cone woofer

2” / 51 mm voice coil
10” weather resistant paper cone woofer

2.5” / 64 mm voice coil
Input connector type Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals
Enclosure material Painted ABS polymer Painted ABS polymer Painted ABS polymer Painted ABS polymer
Grille material Powder coated aluminum Powder coated aluminum Powder coated aluminum Powder coated aluminum
X-Mount material Powder coated aluminum Powder coated aluminum Powder coated aluminum Powder coated aluminum
Enclosure Details
Ingress protection IP-54 IP-54 IP-54 IP-54
Operating environment Designed for indoor and outdoor use Designed for indoor and outdoor use Designed for indoor and outdoor use Designed for indoor and outdoor use
Testing The AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.

Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days

High and low temperature: tested to QSC internal standards between -20° and 50° C
The AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.

Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days

High and low temperature: tested to QSC internal standards between -20° and 50° C
The AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.

Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days

High and low temperature: tested to QSC internal standards between -20° and 50° C
The AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.

Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days

High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight 6.5 lb / 2.9 kg 13.6 lb / 6.2 kg 24.1 lb / 11 kg 31 lb / 15 kg
Product dimensions 10.3” × 6.34” × 6.42” (261 × 161 × 163 mm) 14.4” × 8.5” × 8.5” (365 × 215 × 215 mm) 17.3” × 10” × 9.9” (440 × 254 × 251 mm) 20.3” × 12.5” × 11.7” (516 × 318 × 298 mm)
Shipping weight 16.8 lb / 7.65 kg (pair packed) 33.4 lb / 15.2 kg (pair packed) 32.1 lb / 14.5 kg 40.6 lb / 18.45 kg
Shipping dimensions 15.5" × 10.3” × 18” (394 × 261 × 458 mm) (pair packed) 20" × 12” × 23” (510 × 305 × 585 mm) (pair packed) 24.3 × 13.8” × 13.8” (729 × 351 × 351 mm) 31.7” × 16.1” × 16.1” (805 × 409 × 409 mm)
Included accessories X-Mount mounting system, Euroblock connector,
input panel cover
X-Mount mounting system, Euroblock connector,
input panel cover
X-Mount mounting system, Euroblock connector, input panel cover X-Mount mounting system, Euroblock connector, Input panel cover
Optional accessories     YMS8T yoke mount, M10 Kit-C YMS10T yoke mount, M10 Kit-C
  1 Free-field, -10 dB from on-axis sensitivity
2IEC60268-1 noise signal for 2 hours
3On-Axis, free-field sensitivity, 2.83V, 1 m
4Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

 

System Details AD-S12 AD-S112sw
Effective frequency range1 52 Hz to 20 kHz 30 to 135 Hz
Rated noise power / voltage2 300 watts / 50 volts (rms) 300 watts / 50 volts (rms)
3 95 dB SPL 90 dB SPL
Coverage angle (-6 dB) 75°  
Directivity factor (Q) 12  
Directivity Index 11 dB  
Maximum continuous SPL4 120 dB 115 dB
Maximum peak SPL4 126 dB 121 dB
Rated impedance 8 ohms 8 ohms
Recommended amplifier power (loudspeaker "program" power) 600 watts 600 watts
Transformer taps n/a n/a
HF transducer 1” exit / 1.4” voice coil compression driver  
LF transducer 12” weather resistant paper cone woofer, 3” / 76 mm voice coil 12” weather resistant paper cone woofer,
2.5” / 64mm voice coil
   
Input connector type Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals
Enclosure material Painted ABS polymer Painted ABS polymer
Grille material Powder coated aluminum Powder coated aluminum
Yoke material   Powder coated galvanized steel (included)
Enclosure Details
Ingress protection IP-54 IP-54
Operating environment Designed for indoor and outdoor use Designed for indoor and outdoor use
Testing The AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.

Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days

High and low temperature: tested to QSC internal standards between -20° and 50° C
The AD Series loudspeakers qualified for outdoor use using the following tests:

Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.

Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days

High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight 35.2 lb / 16 kg 29 lb / 13.2 kg
Product dimensions 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm) 23.4” × 13.9” × 12.7” (594 × 354 × 323 mm)
Shipping weight 46.3 lb / 21 kg 43.1 lb / 19.6 kg
Shipping dimensions 34.5” x 17.9” x 17.2” (765 x 455 x 437 mm) 27.5” x 21.75” x 18.5” (698 x 552 x 470 mm)
Included accessories X-Mount mounting system, Euroblock connector, Input panel cover YMS12 yoke mounting system, Euroblock connector,
input panel cover
Optional accessories YMS12 yoke mount, M10 Kit-C  
  1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 hours 
3 On-Axis, free-field sensitivity, 2.83V, 1 m 
3 On-Axis, free-field sensitivity, 2.83 V, 1 m
4 Calculated from rated noise voltage and sensitivity
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

 

 

 

Loading...

Your cart