
Product Details
Overview
The DNT22 I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
Features
- Small form factor, can be unobtrusively located near analog sources or sinks
- Dual power (DC or PoE) means the DIO2x2 will work in systems with either standard or PoE Ethernet switches
- Three input gains accommodate common line levels, phantom power and dynamic mics
- +24V Phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems
- Two analog output gains to accommodate both consumer and pro line level requirements without overload
Package Weight | 1.2 lb |
---|
Specifications
Mic/Line Input Type: | Balanced and RF filtered 3-pin depluggable |
Phantom Power:
|
+24V, software selectable |
Mic/Line Gain:
|
0dB, +25dB, +40dB, software selectable |
Input impedance:
|
>1.8K ohms at any gain setting |
Equivalent Input Noise:
|
115dBu (+40dB gain) |
Maximum Input Levels:
|
(+)8dBu @ 0dB gain, -16dBu @ +25dB gain, -31dBu @ +40dB gain |
Output Type:
|
Balanced line level with automatic muting on loss of Dante signal |
Output Gain:
|
0dB or +10dB, software selectable |
Output Noise:
|
<90dBu @ 0dB gain |
Maximum Output Level:
|
+12dBu |
System THD:
|
<.01% at any gain, input signal 3dB below maximum |
PoE Class:
|
Class 0 802.3af PoE PD compliant |
Certifications:
|
FCC Part 15 Class A, CE |
Dimensions:
|
1.06”H x 6.45”W x 3.45”D |
Operating Temperature:
|
0°C - 40° C |