Lectrosonics DNT0212

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Lectrosonics

Product SKU: LEC-DNT0212

Overview The DNT0212 processor subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for...


Login for Price

DISCLAIMER

ATTENTION! TARIFFS AND INDUSTRY IMPACT: All Pricing is subject to change without notice due to industry wide Tariff increases with several major manufacturers. Please check with your sales rep for current and updated pricing information prior to ordering. Quotes are only valid for the day they are provided. Returns for credit - New product may be approved to be returned for credit within 30 days of original packaging. Product must be new, unopened and in original packaging Returns and canceled orders are subject to a 25% restocking fee. -MANY ITEMS ARE CURRENTLY ON BACKORDER. PLEASE VERIFY PRICING AND AVAILABILITY ON ALL PRODUCTS WITH YOUR SALES REP VIA CHAT, EMAIL, OR PHONE BEFORE PLACING AN ORDER

Product Details

Overview

The DNT0212 processor subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for use with local sources audio sources such as voice evacuation announcements.

The outputs of the matrix can be assigned to a Dante transmit channel, an analog output and/or routed back to an input to be further mixed and processed with another input channel or matrix mix.

Features

  • 32 inputs from DanteTM receive channels
  • 2 analog line level inputs
  • 16 outputs to DanteTM transmit channels
  • 8 line level analog outputs
  • 4 mic/line level analog outputs
  • Supports both switched and redundant modes in DanteTM operation
  • Post-mixing signal processing on all inputs (analog and digital)
  • 48 independent automatic mixers with 38 inputs per mixer and channel activity detectors
  • Support for multi-level mixing: mixes can be looped back and used as mixer inputs
  • Extensive signal processing including filters, delay and channel linking for dynamic processing
    (compressors, limiters)
  • Gain smoothing to prevent transient noise during instantaneous level changes
  • Four test signal generators available for system setup and testing
  • Extensive macro command language
  • Control interfaces via USB, RS-232, Ethernet and programmable logic I/O
  • Rack mount or under table mount

Specifications

Audio inputs:  
Digital:
32 Dante channels
Analog: 2 line level analog (for paging); gain -20 dB to +20dB; 15k ohm differential; 3.75k ohm common
Max. analog input level:
20 dBu
Dynamic range: 102 dB
THD + noise: 0.01%
A-D Sampling Rate:
48 kHz; fixed
   
Audio outputs:  
Digital:
16 Dante transmit channels
Analog: 12 channels; 0 dBu nominal; < 50 ohm source to drive 600 ohm min. load; channels 9 - 12 include 20 dB and 40 dB attenuators
   
Dante Interface:  
Supported sampling rate:
48 kHz
Data rate LED:
100Mbps/1Gbps
Activity LED:
blinks when active
Modes of operation:
Switched mode using either connector; redundant mode with primary and secondary networks using both connectors
   
Network Connectivity: Dante interface and Ethernet control can be connected to the same network
   
Filters:  
EQ stages: 4 per input channel
   
Internal Signal Generator:
 
White noise parameter:
Level [dBu]
Pink noise parameter:
Level [dBu]
Tone (sine wave) parameters:
Level [dBu], frequency
   
Power Requirements:
100-240 VAC, 50/60 Hz
Power Consumption:
20 W maximum
Dimensions:
1.75 x 19.00 x 7.70 inches
Weight:
5.32 lbs., 1.7 kg.
Loading...

Your cart