Lab Gruppen Lucia 120/2

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Lab Gruppen Lucia

Product SKU:

With LUCIA, Lab.gruppen brings significantly better audio performance and more flexibility to everyday AV applications, with real benefits for both the end-user and the audio contractor. LUCIA is a first for Lab.gruppen in providing an alternative solution to amplification and...


Login for Price

Product Details

With LUCIA, Lab.gruppen brings significantly better audio performance and more flexibility to everyday AV applications, with real benefits for both the end-user and the audio contractor. LUCIA is a first for Lab.gruppen in providing an alternative solution to amplification and processing. This ‘decentralized’ approach to AV systems design puts power, processing, control and I/O exactly where it’s needed. Rather than conventional distributed (70 V / 100 V, often referred to as ‘constant voltage’) approach, where all amplifiers, processing and matrixes are located centrally in equipment room racks, often far removed from the end use (and the loudspeakers in those spaces), LUCIA packages all of that in one compact unit – designed to be installed locally, at the heart of any dedicated application.
Specs:

Number of channels: 2
Max total output all channels driven: 120W
Max output voltage per channel (1): 31.0 V Peak
Max. output current per channel: 5.5 Arms
Max. Output Power Per Channel (All Channels Driven):

2 Ohms:  60W
4 Ohms:  60W
8 Ohms:  60W
16 Ohms:  30W 

Performance:

THD 20 Hz – 20 kHz at 1 W into 8 ohms:  <0.3%
THD at 1 kHz and 1 dB below clipping:  <0.2%
Signal To Noise Ratio:  >92 bBA
Channel separation (Crosstalk) at 1 kHz:  60 dBA
Frequency response:  5 Hz- 22 kHz
Input impedance:  10k Ohm
Common Mode Rejection (CMR):  40 dB 

Gain, Sensitivity and Limiters:

VPL for 16 ohm mode:  31 V
VPL for 8 ohm mode:  31 V
VPL for 4 ohm mode:  22 V
VPL for 2 ohm mode:  15 V
Sensitivity, balanced input:  8 dBu / 1.9V RMS
Sensitivity, RCA input:  2 dBu / 0.98V RMS
Input headroom for clip, balanced:  12 dBu / 3.09V RMS
Input headroom for clip, RCA:  6 dBu / 1.55V RMS 

Connectors and Buttons:

Input connectors (per ch.):  3-pin detachable screw terminals, electronically balanced        
Input connectors (ch. 1&2):  Unbalanced RCA type        
Output connectors (per ch.):  2-pin detachable screw terminals        
GPI (power control input) (2):  2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain       
GPO (power state output) (2):  Contact closure type, 2 pins in a detachable screw terminal. Default for external monitoring of fault/protection/power off        
USB:  For firmware update and configuration for the matrix models        
Cooling:  One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C       
Auto mode:  The power state is controlled automatically by the audio signal        
Level adjustment (per channel) (2)  Front panel potentiometer, detented from -inf to 0 dB

Matrix Features:

Input Processing Block:  Default with 16 parametric EQs
Mix Matrix Routing Block:

Per-channel Output Preset Recall Defining Settings For:  High-pass filter, output EQ, Multiband output compressor, Output look ahead limiter
Two Line Level Outputs:  Each capable of driving 10 LUCIA devices in parallel

Power:

Nominal voltage:  100 – 240 VAC       
Operating voltage:  85 – 265 VAC       
Standby consumption:  <1 W       
Mains connector:  IEC inlet       
Dimensions:  8.5" W x  1U H x 11"D        
Weight: 4.2 lbs.
Finish:  Black aluminum front and black steel chassis        
Approvals:  CE, CSA, CCC, PSE, FCC, Energy Star

Loading...

Your cart