The CBT 100LA-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers.
- Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
- Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
- Dynamic SonicGuard™ overload protection
- Swivel (pan)/tilt wall bracket included.
- Built-in 70V/100V transformer, plus 8 ohm direct capability.
|Components||Sixteen 50 mm (2 in) Full-Range|
|Frequency Range (-10 dB)||80 Hz – 20 kHz|
Narrow Mode: 15° (2 kHz - 16 kHz) (±10°)
Broad Mode: 40° (1 kHz - 16 kHz) (±10°)
Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
|Sensitivity (2.83V@ 1m)||Narrow: (speech mode) 96 dB (2 kHz - 14 kHz )
(music mode) 93 dB (300 Hz - 18 kHz)
Broad: (speech mode) 93 dB (2 kHz - 14 kHz)
(music mode) 90 dB (300 Hz - 18 kHz)
|Nominal Impedance||8 ohms (in Thru mode)|
(8 ohm setting)
|325 W (1300W peak), 2 hrs
200 W (800W peak), 100 hrs
|Max SPL||Narrow: (speech mode) 121 dB cont ave (127 peak)
(music mode) 118 dB cont ave (124 peak)
Broad: (speech mode) 118 dB cont ave (124 peak)
(music mode) 115 dB cont ave (121 peak)
|70V/100V Transformer Taps||120W, 60W, 30W (15W at 70V only), and 8? thru, via switch|
|Enclosure||Fiberglass reinforced ABS cabinet, painted aluminum grille|
|Outdoor Capability||IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.|
|Colors||Black or White (-WH)|
|Insert Points||18 M6 insert points on back panel.|
|Mounting||Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.|
|Dimensions (H x W x D)||1000 x 98.5 x 153
(39.4 in x 3.8 in x 6.0 in)
|Net Weight||7.2 kg (15.8 lb)|
|Included Accessories||Swivel (pan) / tilt wall bracket|
|Optional Accessories||MTC-PC2 terminal panel cover
MTC-CBT-FM1 flush-mount low-profile wall-mount bracket
MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand