Audio-Technica M2RM

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Audio-Technica

Product SKU:

Overview Body-pack stereo receiver for use with Audio-Technica M2L and M2M Wireless In-ear Monitor Systems. Includes EP3 in-ear dynamic headphones, extension cable/adapter with 3.5 mm connector, interchangeable earpieces (Small, Medium & Large), ear-conforming foam tips, soft pouch. The M2 Wireless...


Login for Price

Product Details

Overview
Body-pack stereo receiver for use with Audio-Technica M2L and M2M Wireless In-ear Monitor Systems. Includes EP3 in-ear dynamic headphones, extension cable/adapter with 3.5 mm connector, interchangeable earpieces (Small, Medium & Large), ear-conforming foam tips, soft pouch.
The M2 Wireless In-Ear Monitor System is designed to make professional in-ear monitoring features accessible for performers who want to be free from the problems associated with floor wedges. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. The wireless UHF M2T Stereo Transmitter provides a choice of 100 selectable frequencies and is equipped with two XLR/¼” combo input connectors into which users can connect line-level inputs. While up to 10 complete M2 systems may be used on stage simultaneously, any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.
Features

High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume
100 selectable UHF channels
Up to 10 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of two independent signals at the receiver
3.5 mm line-in jack connects to ambient microphone, click track & more
LED indicators provide easy-to-read level monitoring
XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
Adjustable squelch eliminates annoying static
Pilot tone protects against RF interference when the transmitter is turned off
Limiter (defeatable) helps protect your hearing from sudden peaks
Portable system is quick to load and set up
Reduces on-stage audio clutter for better overall mix & less feedback
Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency
Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
Personal fit with 3 sizes of rubber eartips plus ear-conforming foam tips
Auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input.

 
Specifications

OVERALL SYSTEM 

Operating Frequencies
Band E: 790.000 to 822.000 MHz, 100 frequencies 

Band F: 832.000 to 865.000 MHz, 100 frequencies 

Band L: 575.000 to 608.000 MHz, 100 frequencies 

Band M: 614.000 to 647.000 MHz, 100 frequencies DISCONTINUED IN NORTH AMERICA 

Not all frequency bands available in all areas. Please check with local regulations.

Minimum Frequency Step                                                                  
25 kHz

Modulation Mode
FM stereo

Maximum Deviation
±40 kHz

Dynamic Range
90 dB (typical), A-weighted

Total Harmonic Distortion
<1% at (1 kHz, ±20 kHz Deviation)

Operating Range
100 m (300'), typical 
Open range environment with no interfering signals.

Operating Temperature Range
-5° C (23° F) to +50° C (122° F) 
Battery performance may be reduced at very low temperatures.

Frequency Response
60 Hz to 13 kHz (+/- 3 dB)

Simultaneous Use
10 channels per band (maximum recommended) 
For assistance with multi-band operation or other frequency coordination issues, please contact your local Audio-Technica customer service representative.

 

RECEIVER 

Receiving System                       
Double conversion superheterodyne

RF Sensitivity
20 dBuV (at 60 dB S/N ratio, 50 ohms termination)

Headphone Output Connector
3.5 mm TRS stereo phone jack

Headphone Output Power
65 mW (at 32 ohms)

Antenna Input
SMA-type, 50 ohms

Aux Input Connector
3.5 mm TRS stereo phone jack

Batteries
2 x 1.5V AA (not included)

Battery Life
8 hours (alkaline) 
Depending on battery type and use pattern

Dimensions
70.0 mm (2.76") W x 
25.0 mm (0.98") D x 
110.0 mm (4.33") H

Net Weight
110 g (3.9 oz), without batteries

Accessories Included
EP3 earphone; frequency sticker; flexible antenna

 

TRANSMITTER 

RF Power Output
10 mW/30 mW (switchable internally), 50 ohms 
Limited to 10 mW within 863 MHz to 865 MHz 
Following national regulations

Spurious Emissions                         
Following federal and national regulations

Input Connections
XLRF-type/6.3 mm stereo (1/4") combination connector 
Pin 1 and Sleeve: Ground 
Pin 2 and Tip: Hot 
Pin 3 and Ring: Cold

Maximum Input Level
XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu 
6.3 mm (1/4") mono, unbalanced: +26 dBu

Loop Output Connector
XLRM-type connector 
Pin 1: Ground 
Pin 2: Hot 
Pin 3: Cold

Power Requirement
12-18V DC, 600 mA

Antenna
Attached whip

Dimensions
210.0 mm (8.30") W x 
132.0 mm (5.20") D x 
44.0 mm (1.70") H

Net Weight
870 g (30.7 oz), without accessories

Loading...

Your cart