Product Details
Details
Overview:
The unDX2IO+ DanteTM Audio Interface is a cost effective multi?IO wall box. The unDX2IO+ features two balanced mic/line XLR inputs, two balanced XLR line outputs, and a further two balanced line inputs on de-pluggable connectors on the side of the unit. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into all dual gang US junction boxes, mud rings, and old work brackets. The unDX2IO+ is PoE enabled, so all connectivity (power, control, and data) is provided by a single CAT?5/6 cable. The unDX2IO+’s size and I/O density make it easy to put Dante connec? tivity wherever it’s needed.
Features:
- Small form factor, can be unobtrusively located near analog sources or sinks
- Four input gains to accommodate common line levels, dynam? ic, and phantom powered mics
- +48V phantom power per channel - powers all types of phan? tom powered microphones typically used in installed AV systems
- Analog output gain is software adjustable between 0dB and –60dB plus mute to accommodate all types of line input audio equipment—both consumer and pro levels
- Industry standard +20dBu maximum input levels (at 0dB input gain) and +20dBu maximum output levels
- Uses standard IEEE 802.3af PoE power
- Full Dante system status LEDs on the front panel
Specifications:
| Mic/Line Input Type | Balanced and RF filtered XLR |
| Phantom Power | +48V, software selectable |
| Mic/Line Gain | -15dB (pad active), 0dB, +25dB, +40dB, software selectable |
| Input Impedance | >1.8K ohms at any gain setting |
| Equivalent Input Noise | -115dBu (+40dB gain) |
| Maximum Input Levels | +20dBu @ 0dB gain (pad active), +5dBu @ 0dB gain, -22dBu @ +25dB gain, -38dBu @ +40dB gain |
| Side Line Input Type | Balanced and RF filtered 3-pin depluggable, with software selectable pro or consumer input sensitivity |
| Output Type | Balanced line level on XLR. with automatic muting on loss of Dante signal |
| Output Gain | 0dB to –60dB plus mute, software selectable |
| Output Noise | <-85dBu @ 0dB gain |
| Maximum Output Level | +20dBu (@ 0dB output gain) |
| System THD | <.05% at any gain, input signal 3dB below maximum |
| PoE Class | Class 0 802.3af PoE PD compliant |
| Certifications | FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A) |
| Dimensions | 3.54” W x 4.2” H x 1.88” D |
| Operating Temperature | 0°C - 40°C |
){kind=link}