
Product Details
Details
Overview
The unDIO2x2+ I/O Interface is a 2 in / 2 out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dantebased networked audio system. The unDIO2x2+’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring. The unDIO2x2+ is an upgrade of the earlier unDIO2x2, and adds several features including true +48V phantom power, maximum input and output levels of +20dBu, added input gain settings, and full output level control.
Features
-
Small form factor, can be unobtrusively located near analog sources or sinks
-
Dual power (DC or PoE) means the unDIO2x2+ will work in systems with either standard or PoE Ethernet switches
-
Five input gains to accommodate common line levels, phantom power and dynamic mics
-
+48V phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems
-
Analog output gains software adjustable between 0dB and -60dB plus mute to accommodate all types of line input audio equipment - both consumer and pro levels
-
Industry standard +20dBu maximum input levels (at 0dB input gain) and +20dBu maximum output levels
-
Full Dante system status LEDs on the front panel
Specifications
Mic/Line Input Type | Balanced and RF filtered 3-pin depluggable |
Phantom Power | +48V, software selectable |
Mic/Line Gain | -12dB (pad active), 0dB, +15dB, +30dB, +45dB, software selectable |
Input Impedance | >1.8K ohms at any gain setting |
Equivalent Input Noise | -119dBu (+45dB gain) |
Maximum Input Levels | +20dBu @ 0dB gain (with pad active), +8dBu @ 0dB, -7dBu @ +15dB gain, -22dBu @ +30dB gain, -37dBu @ +45dB gain |
Output Type | Balanced line level with automatic muting on loss of Dante signal |
Output Gain | 0dB to –60dB plus mute, software selectable |
Output Noise | <-85dBu @ 0dB gain |
Maximum Output Level | +20dBu (@ 0dB output gain) |
System THD | <.05% at any gain, input signal 3dB below maximum |
PoE Class | Class 0 802.3af PoE PD compliant |
Certifications | FCC 47CFR Parts 15B and 18 (Class A), EN 55011, ICES-003, CE (EN55022 Class A and EN55024 Class A) |
Dimensions | 1.06”H x 6.45”W x 3.45”D |
Operating Temperature | 0°C - 40°C |