Ashly nXe4004

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Ashly

Product SKU: ASH-nXe4004

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.Choose from 2 and 4 channel models with 3000, 1500, 800, 400 Watts per...


Login for Price

DISCLAIMER

ATTENTION! TARIFFS AND INDUSTRY IMPACT: All Pricing is subject to change without notice due to industry wide Tariff increases with several major manufacturers. Please check with your sales rep for current and updated pricing information prior to ordering. Quotes are only valid for the day they are provided. Returns for credit - New product may be approved to be returned for credit within 30 days of original packaging. Product must be new, unopened and in original packaging Returns and canceled orders are subject to a 25% restocking fee. -MANY ITEMS ARE CURRENTLY ON BACKORDER. PLEASE VERIFY PRICING AND AVAILABILITY ON ALL PRODUCTS WITH YOUR SALES REP VIA CHAT, EMAIL, OR PHONE BEFORE PLACING AN ORDER

Product Details

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.

Choose from 2 and 4 channel models with 3000, 1500, 800, 400 Watts per channel. Simply set the DIP-switch configuration to the desired mode: Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you're set to go.

Available in three product families, nX is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. When you choose Ashly nX, you choose a hand-built, US-made product backed by our team of engineers and an industry-leading 5-year warranty.

Features

  • 2 and 4-channel high-output, lightweight amplifiers with programmable output on each channel (High-Z or Low-Z, selected via rear panel DIP switches)
  • Power-saving, Energy Management System (Ashly EMS) automatic <1W sleep-mode (defeatable)
  • Front panel power switch and level controls (can be disabled for security)
  • Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
  • Remote DC level control on each input channel
  • Switch mode power supply automatically detects 120V or 240V AC operation
  • Extensive protection circuitry, continuously variable cooling fans
  • Multiple independent internal power supplies provide increased channel separation and reliability
  • Ethernet port for use with control and monitoring of amplifier functions, with front panel COM activity LED
  • Serial data port for use with Ashly remote control devices, or optional RS-232 converter for third party controllers (INA-1)
  • Use Protea Software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation
  • Real-Time Clock with Event Scheduler
  • Instant Standby Mode, 30% reduction in power consumption with on/off triggered by contact closure, software control, or event scheduler
  • Programmable power-on delay
  • Preset recall via contact closure, software control, remote control, or event scheduler
  • Aux preamp outputs, and fault condition logic outputs
  • Optional Cobranet or Dante network audio and AES3 digital audio input with pass-through
  • Neutrik Combo XLR - 1/4" TRS jack plus Euroblock input connectors
  • Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability
  • Neutrik powerCON detachable AC mains connector
General
Voltage Gain Selectable at 26, 32, or 38 dB, and 1.4 V
Damping Factor >250 (8 Ω load <1 kHz)
Filter Input High Pass Filter: 80 Hz 2nd order
Distortion <0.5% SMPTE, typical
<0.5% THD-N, typical (8 Ω, 10 dB below rated power, 20 Hz to 20 kHz)
Channel Separation -75 dB (dB from full output, 1 kHz)
Signal / Noise 20 Hz to 20 kHz, un-weighted
>105 dB
Frequency Response 20 Hz to 20 kHz, ±0.05 dB
Connector Balanced Input Connector: Euroblock 3.5 mm, 1/4" TRS and XLR combo jack
Input Impedance 10 kΩ
Maximum Input Level 21 dBu
Speaker Output Connector: Neutrik & speakON
Network Control Network: Compatible with standard 100 MB Ethernet
AUX Outputs Connector: Balanced Euroblock 3.5 mm
Maximum Output Level: 21 dBu
Contact Closure Remote Standby: Euroblock 3.5 mm, close contact to GND for standby mode
Preset Recall: Euroblock 3.5 mm, close contact to GND for preset 1-4 recall
Data Data Connection: Euroblock 3.5 mm - Gnd, 18 V, in, out
Outputs Fault Condition Logic Outputs: 4 x 3.5 mm Euroblock
Level Control Remote DC: 4 x 3.5 mm Euroblock - Gnd, CV, V+ per input
Attenuation Front panel, software, offset link group, and remote per channel
Fully off = mute
Protection Circuits Inrush current limitation, temperature monitoring, output over-power protection, and mains fuses
Cooling Continuously variable temperature controlled axial fans
Environmental Non-condensing 32 to 113°F (0 to 45°C)
Power Requirements
Power At 50 Hz
Nominal (Automatic Sensing SMPS): 120 VAC
Operating Range: 70 to 135 VAC
Minimum Power-Up: 85 VAC

At 60 Hz
Nominal (Automatic Sensing SMPS): 240 VAC
Operating Range: 140 to 270 VAC
Minimum Power-Up: 170 VAC
Connector Power Cable Connector: 20 A powerCON
Maximum Output Power Per Channel, Low-Z Output, All Channels Driven
2/4/8 Ω: 400 W
Output Low Z Output, Bridge Mode, All Channels Driven: 800 W (4/8 Ω)
70V, 100V Output, All Channels Driven: 400 W (70/100 V (per channel)
Power Draw Sleep Mode: < 1 W
Standby Mode: 40 W
Idle (No Signal): 70 W
Current Draw For 120 VAC
Sleep Mode: 0.1 A
Standby Mode: 0.70 A
Idle (No Signal): 1.30 A

For 240 VAC
Sleep Mode: 0.05 A
Standby Mode: 0.35 A
Idle (No Signal): 0.65 A

 

Maximum, All Channels Driven, Typical Input
1/8 Max Power @ 2 Ω): 5 A for 120 VAC, 2.5 A for 240 VAC

Dissipation Thermal Dissipation: Sleep Mode: <3.4 BTU/hr
Standby Mode: 136 BTU/hr
Idle (no signal): 238 BTU/hr
Typical (1 / 8 Max Power @ 2 Ω): 595 BTU/hr
LED Indicators Front Panel LED Indicators

 

White: Power Switch: On, off, standby (flashing)

Red LED:
Clip / Mute Per Channel: Clip @ 1 dB below full output / mute
Protect: On (fault condition or shut down), Off

Green LED:
Signal Per Channel: -18 dBu, below rated output
Bridge Per Channel Pair: On, off
Com: On, for Ethernet data or device ID
Current Per Channel: Proportional to output

Yellow LED:
Temperature Per Channel: On dim at 90% maximum operating temperature, full bright + protect at 100%
Sleep: On, amplifier is asleep from audio inactivity
Disable: On, power switch & front panel attenuators are disabled

Dimensions 19.0 x 3.5 x 16.8" (48.3 x 8.9 x 42.8 cm)
Weight 32.4 lb (14.8 kg)
Packaging Info
Package Weight 32.5 lb
Loading...

Your cart