Ashly nXe3.04

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Ashly

Product SKU: ASH-nXe3.04

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.Choose from 2 and 4 channel models with 3000, 1500, 800, 400 Watts per...


Login for Price

DISCLAIMER

ATTENTION! TARIFFS AND INDUSTRY IMPACT: All Pricing is subject to change without notice due to industry wide Tariff increases with several major manufacturers. Please check with your sales rep for current and updated pricing information prior to ordering. Quotes are only valid for the day they are provided. Returns for credit - New product may be approved to be returned for credit within 30 days of original packaging. Product must be new, unopened and in original packaging Returns and canceled orders are subject to a 25% restocking fee. -MANY ITEMS ARE CURRENTLY ON BACKORDER. PLEASE VERIFY PRICING AND AVAILABILITY ON ALL PRODUCTS WITH YOUR SALES REP VIA CHAT, EMAIL, OR PHONE BEFORE PLACING AN ORDER

Product Details

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.

Choose from 2 and 4 channel models with 3000, 1500, 800, 400 Watts per channel. Simply set the DIP-switch configuration to the desired mode: Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you're set to go.

Available in three product families, nX is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. When you choose Ashly nX, you choose a hand-built, US-made product backed by our team of engineers and an industry-leading 5-year warranty.

Features

  • 2 and 4-channel high-output, lightweight amplifiers with programmable output on each channel (High-Z or Low-Z, selected via rear panel DIP switches)
  • Power-saving, Energy Management System (Ashly EMS) automatic <1W sleep-mode (defeatable)
  • Front panel power switch and level controls (can be disabled for security)
  • Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
  • Remote DC level control on each input channel
  • Switch mode power supply automatically detects 120V or 240V AC operation
  • Extensive protection circuitry, continuously variable cooling fans
  • Multiple independent internal power supplies provide increased channel separation and reliability
  • Ethernet port for use with control and monitoring of amplifier functions, with front panel COM activity LED
  • Serial data port for use with Ashly remote control devices, or optional RS-232 converter for third party controllers (INA-1)
  • Use Protea Software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation
  • Real-Time Clock with Event Scheduler
  • Instant Standby Mode, 30% reduction in power consumption with on/off triggered by contact closure, software control, or event scheduler
  • Programmable power-on delay
  • Preset recall via contact closure, software control, remote control, or event scheduler
  • Aux preamp outputs, and fault condition logic outputs
  • Optional Cobranet or Dante network audio and AES3 digital audio input with pass-through
  • Neutrik Combo XLR - 1/4" TRS jack plus Euroblock input connectors
  • Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability
  • Neutrik powerCON detachable AC mains connector
General
Voltage Gain Selectable at 26 dB, 32 dB, 38 dB, or 1.4 V
Damping Factor >250 (8 Ω load <1 kHz)
Filter Input High Pass Filter: 80 Hz 2nd order
Distortion <0.5% SMPTE, typical
<0.5% THD-N, typical (8 Ω, 10 dB below rated power, 20 Hz to 20 kHz)
Channel Separation -75 dB (dB from full output, 1 kHz)
Signal / Noise 20 Hz to 20 kHz, un-weighted
>114 dB (all 3.0x models)
Frequency Response 20 Hz to 20 kHz, ±0.05 dB
Connector Balanced Input Connector: Euroblock 3.5 mm, 1/4" TRS and XLR combo jack
Input Impedance 10 kΩ
Maximum Input Level +21 dBu
Speaker Output Connector: Neutrik & speakON
Network Control Network: Compatible with standard 100 MB Ethernet
AUX Outputs Connector: Balanced Euroblock 3.5 mm
Maximum Output: 21 dBu
Contact Closure Remote Standby: Euroblock 3.5 mm, close contact to GND for standby mode
Preset Recall: Euroblock 3.5 mm, close contact to GND for preset 1-4 recall
Data Data Connection: Euroblock 3.5 mm - Gnd, +18 V, In, Out
Level Control Remote DC: Euroblock 3.5 mm - Gnd, CV, V+ per input
Attenuation Front panel, software, offset link group, and remote per channel
fully off = mute
Amplifier Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Cooling Continuously variable temperature controlled axial fan(s)
Environmental Non-condensing 32 to 113ºF (0 to 45ºC)
Power Requirements
Power At 50 Hz
Nominal (Automatic Sensing SMPS): 120 VAC
Operating Range: 70 to 135 VAC
Minimum Power-Up: 85 VAC

At 60 Hz
Nominal (Automatic Sensing SMPS): 240 VAC
Operating Range: 140 to 270 VAC
Minimum Power-Up: 170 VAC
Connector Power Cable Connector: 32 A powerCON
Output For Max Output Power Per Channel, EIAJ Test Standard, 1 kHz, 20 Hz to 20 kHz, 1% THD & Low Z Output: 2 Ω: 3,000 W
4 Ω: 2,000 W
8 Ω: 1,250 W

For Low Z output, Bridge Mode, 20 Hz to 20 kHz & 1% THD:
4 Ω: 6,000 W

For Output Per Channel:
70 V: 2,450 W
100 V: 1,250 W
Note: All Channels Driven
Power Draw Sleep Mode: < 1 W
Standby Mode: 70 W
Idle (No Signal): 100 W
Note: All Channels Driven
Current Draw For 120 VAC
Sleep Mode: 0.1 A
Standby Mode: 1.30 A
Idle (No Signal): 1.85 A

For 240 VAC
Sleep Mode: 0.2 A
Standby Mode: 0.65 A
Idle (No Signal): 0.92 A
Maximum for all Channels Driven:
For 120 VAC
Typical: 29.5 A
For 240 VAC
Typical: 14.7 A
Dissipation Thermal Dissipation: Sleep Mode: <3.4 BTU/hr
Standby Mode: 238 BTU/hr
Idle (no signal): 340 BTU/hr
Typical (1 / 8 Max Power): 2,720 BTU/hr
Note: All Channels Driven
LED Indicators Front Panel LED Indicators: White LED:
Power Switch: On, off, standby (flashing)

Red LED:
Clip / Mute Per Channel: Clip @ 1 dB below full output / mute
Protect: On, Off

Green LED:
Signal Per Channel: -18 dBu
Bridge Per Channel Pair: On, off
Com: On, for Ethernet data or device ID
Current Per Channel: Proportional to output

Yellow LED:
Temperature Per Channel: On dim at 90% max operating temperature, full bright + protect at 100%
Sleep: On, amplifier is asleep from audio inactivity
Disable: On, power switch & front panel attenuators are disabled
Processor
Input Source Protēa DSP
Options: Analog, auto (net, AES3, analog) Note: All DSP functions can be linked to 1 of 16 link groups
Limiter Brick Wall Limiter: Threshold: -20 to 20 dBu
Ratio: Infinite
Attack: 0.2 to 50 ms/dB
Release: 5 to 1000 ms/dB
Control Advanced Gate Controls: Key Engage Enable: Yes
Key Frequency: 20 Hz to 20 kHz
Key Bandwidth: 0.016 to 3.995 octave
Gain Gain (with / without VCA): -50 to 12 dB, off, polarity invert
Digital VCA Groups: 4 available
Remote RD8C Gain: Enable per channel, 0 dB to -∞
WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute
EQ Type For 31-Band
Filter Type: Constant Q or proportional
Bandwidth: 0.499 octave to 0.25 octave

For Parametric 2,4,6, or 10 Band
Frequency: 20 to 20 kHz
Level: -30 to 15 dB
Q Value: 0.016 to 3.995 octave
For Hi / Low Shelf 6 / 12 dB/octave
Frequency: 20 Hz to 20 kHz
Level: -15 to 15 dB

For All Pass
Frequency: 20 Hz to 20 kHz

For Variable Q HP / LP
Frequency: 20 Hz to 20 kHz
Q Value: 3.047 to 0.267

For Notch / Bandpass
Frequency: 20 Hz to 20 kHz
Q Value: 92.436 to 0.267
Crossover 2 Way, 3 Way, 4 Way Crossover & High Pass / Low Pass Filters
Bessel & Butterworth Filters: 12 / 18 / 24 / 48 dB/octave
Linkwitz-Riley Filter: 12 / 24 / 48 dB / octave
Frequency: Off, 20 Hz to 20 kHz
Delay Sampling Rate: At 48kHz (Input Time, Distance & Temperature)
Speaker Delay: 0 to 21 ms
Delay: 0 to 682 ms At 96 kHz (Input Time, Distance & Temperature)
Speaker Delay: 0 to 10.6 ms
Delay: 0 to 341 ms
Audio Metering Range: -60 to 20 dBu
Increments: 1 dB
Peak Hold Indicator: Yes
Signal Generator Pink Noise, White Noise, Sine Wave
Signal Level: Off, -50 to 20 dBu
Sine Wave Frequency: 20 Hz to12 kHz
Processor Input A/D, Output D/A: 24 bit
DSP Processors: 32-bit floating point
Sample Rates: 48 kHz, 96 kHz
Propagation Delay @ 48 kHz: 1.42 ms
Propagation Delay @ 96 kHz: 0.71 ms
Mixer Gain (0.5 dB Increments): Off, -50 to 12dB
Mute: Per channel
Auto-mixer Enabled: Per channel
Global Auto-mixer Response: 0.01 to 2 sec
Enable Ducking at Mixer: Yes
Ducking LED: Per channel if enabled Metering: Level, auto-mixer level
Filters Number: 12 In/Out per filter: Yes
Lock per filter and global lock: Yes
Filter Modes: Float, Restricted, Manual
Filter Type: Notch, Parametric
Filter Frequency Range: 20 Hz to 20 kHz
Notch Filter: -∞
Parametric Filter: 15 dB to -30 dB
Filter Bandwidth: 0.016 to 3.995 octave
Detector Sensitivity: 5 levels
Float Time: 5 minutes to 24 hours
Compressor
Threshold -20 to 20 dBu
Ratio 1.2:1 to infinite
Attack 0.2 to 50 ms
Release 5 to 1000 ms/dB
Detectors Peak / average
Attenuation 2 available
Metering In, out, attenuation, graphical
Controls
Level Target Level: -40 to 20 dBu
Action Type Gentle, normal, aggressive, user defined
Maximum Gain 0 to 22 dB
Metering Input, gain, attenuation
Ratio 1.2:1 to 10:1
Threshold -30 to 0 dB
Gain 5 to 1000 ms/dB
Hold 0 to 6 seconds
Noise Characteristics
Gain Maximum: -20 to 20 dB
Minimum Base: -40 to 20 dB
Gain Adjustment Range 0.2 to 20 s/dB
Groups Link Groups: 16 available
Input Channels ANC: 1 to 2 or 1 to 4
Threshold Range Noise: -40 to 20 dBu
Ratio Program/Ambient Gain: 0.3:1 to 3:1
Metering Input level, attenuation, average noise
Ducking Trigger Threshold: -80 to 20 dBu
Ducking Release: 5 to 1000 ms/dB
Ducking Depth: 0 to -30 dB, -∞
Enable Ducking at Matrix Mixer: Yes
Metering: Input
Gate
Threshold -80 to 20 dBu
Range Off, 100 to 0 dB
Attack 0.2 to 50 ms/dB
Release 5 to 1000 ms/dB
Metering Key signal, gate LED, graphical
Dimensions 19.0 x 3.5 x 16.8" (482.6 x 89.0 x 426.7 mm)
Weight < 28.0 lb (12.7 kg)
Packaging Info
Package Weight 35 lb
Box Dimensions (LxWxH) 19 x 16 x 4"
Loading...

Your cart