Ashly nXe1.54

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Ashly

Product SKU: ASH-nXe1.54

OverviewWith NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.Choose from 2 and 4 channel models with 3000, 1500, 800, 400 Watts per...


Login for Price

DISCLAIMER

ATTENTION! TARIFFS AND INDUSTRY IMPACT: All Pricing is subject to change without notice due to industry wide Tariff increases with several major manufacturers. Please check with your sales rep for current and updated pricing information prior to ordering. Quotes are only valid for the day they are provided. Returns for credit - New product may be approved to be returned for credit within 30 days of original packaging. Product must be new, unopened and in original packaging Returns and canceled orders are subject to a 25% restocking fee. -MANY ITEMS ARE CURRENTLY ON BACKORDER. PLEASE VERIFY PRICING AND AVAILABILITY ON ALL PRODUCTS WITH YOUR SALES REP VIA CHAT, EMAIL, OR PHONE BEFORE PLACING AN ORDER

Product Details

Overview

With NX you always have the right amp for the job. Each channel on NX amplifiers have Selectable Outputs so you can connect to virtually any speaker.

Choose from 2 and 4 channel models with 3000, 1500, 800, 400 Watts per channel. Simply set the DIP-switch configuration to the desired mode: Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you're set to go.

Available in three product families, nX is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. When you choose Ashly nX, you choose a hand-built, US-made product backed by our team of engineers and an industry-leading 5-year warranty.

Features

  • Selectable 80Hz Hipass filter, limiter, and input gain per channel, via rear panel
  • Remote DC level control per channel
  • Extensive protection circuitry, continuously variable cooling fans
  • Ethernet port for software control and monitoring of amplifier functions, with front panel COM activity LED
  • Serial data port available for Ashly WR-5 and RD-8C programmable remote control (op onal RS-232 converter INA-1 available for third party controllers)
  • Instant Standby Mode, 30% reduction in idle power consumption, triggered by contact closure, software control, or event scheduler
  • Preset recall via contact closure, software control, remote control, or event scheduler
  • Programmable power-on delay
  • Aux preamp line outputs for driving other amplifiers
  • Fault condition logic outputs, per channel
  • Neutrik Combo XLR 1/4" TRS jack plus Euroblock input connectors
  • Neutrik speakON twist locking loudspeaker connectors
  • Neutrik powerCON detachable AC mains connector
  • Safety/Compliance: cTUVus, CE, FCC, RoHS

Specifications

Voltage Gain Selectable at 26dB, 32dB, 38dB, or 1.4V
Damping Factor >250 (8 Ohms load <1kHz)
Input High Pass Filter 80Hz 2nd order
Distortion (SMPTE, typical) <0.5%
Distortion (THD-N, typical) <0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
Channel Separation -75dB (dB from full output, 1kHz)
Signal-to-Noise (20Hz-20kHz, unweighted)
>114dB (all 3.0x models)
>111dB (all 1.5x models)
>108dB (all 800x models)
>105dB (all 400x models)
Frequency Response 20Hz-20kHz, +/-0.05dB
Balanced Input Connector Euroblock 3.5mm, 1/4" TRS and XLR Combo jack
Input Impedance 10k Ohms
Maximum Input Level +21dBu
Speaker Output Connector Neutrik speakON
Control Network Compatible w/ standard 100MB Ethernet
AUX Output Connector Balanced Euroblock 3.5mm
AUX Output Maximum Level +21dBu
Remote Standby Contact Closure Euroblock 3.5mm, close contact to GND for standby mode
Preset Recall Contact Closure Euroblock 3.5mm, close contact to GND for preset 1-4 recall
Data Connection Euroblock 3.5mm - Gnd, +18V, In, Out
Fault Condition Logic Outputs Fault indicated by loss of 1Hz "heartbeat" pulse signal
Remote DC Level Control Euroblock 3.5mm - Gnd, CV, V+ per input
Attenuators (per channel) Front panel, software, offset link group, and remote. Fully off = Mute
Amplifier Protection Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Cooling Continuously variable temperature controlled axial fan(s)
Environmental 32-113 deg F, (0-45 deg, C) (noncondensing)

Power Requirements (@ 50/60Hz)

Nominal (Automatic Sensing SMPS) 120VAC, 240VAC
Operating Range 70-135VAC, 140-270VAC
Minimum power-up 85VAC, 170VAC
Power Cable Connector 20A powerCON (32A powerCON 3.04 model only)

Weights and Dimensions

Unit Weight 1.54/3.04:28.7lbs(13kg) 1.52/3.02:22.7lbs(10.3kg) 4002/8002:22.2lbs(10.1kg) 4004/8004:25.9lbs(11.7kg)
Shipping Weight 1.54/3.04:35.2lbs(16kg) 1.52/3.02:29.2lbs(13.3kg) 4002/8002:28.7lbs(13.1kg) 4004/8004:32.4lbs(14.8kg)
Unit Dimensions (all models) 19"W x 3.5"H x 16.84"D (483mm x 89mm x 428mm)
Shipping Dimensions 24.5"W x 22"H x 5.25"D (622mm x 559mm x 133mm)

Front Panel LED Indicators

POWER (white)

Switch: On, Off, Standby (flashing)

PROTECT (red)

On (fault condition or shut down), Off

SLEEP (blue)

On, amplifier is asleep from audio inactivity

DISABLE (yellow)

On, power switch & front panel attenuators are disabled

COM (green)

On, for Ethernet data or Device ID

Per Channel

CLIP/MUTE (red)

Clip @ 1dB below full output / Mute

SIGNAL (green)

-18dB below rated output

CURRENT (green)

Proportional to output

TEMP (yellow)

On dim at 90% max operating temperature, full bright + protect at 100%

BRIDGE (green)

On, Off
Loading...

Your cart