Ashly NE4250PE

Regular price $2,649.00 $2,553.23

Availability: Available Unavailable

Product Type: Pro Audio

Product Vendor: Ashly

Product SKU: ASH-NE4250PE

Targeted for the performance installation and constant voltage markets these amplifiers add a new level of power and control from the simplest to most advanced audio system applications. The models include both four and eight channel low impedance 25V 70V...


DISCLAIMER

ATTENTION! TARIFFS AND INDUSTRY IMPACT: All Pricing is subject to change without notice due to industry wide Tariff increases with several major manufacturers. Please check with your sales rep for current and updated pricing information prior to ordering. Quotes are only valid for the day they are provided. Returns for credit - New product may be approved to be returned for credit within 30 days of original packaging. Product must be new, unopened and in original packaging Returns and canceled orders are subject to a 25% restocking fee. -MANY ITEMS ARE CURRENTLY ON BACKORDER. PLEASE VERIFY PRICING AND AVAILABILITY ON ALL PRODUCTS WITH YOUR SALES REP VIA CHAT, EMAIL, OR PHONE BEFORE PLACING AN ORDER

Product Details

Targeted for the performance installation and constant voltage markets these amplifiers add a new level of power and control from the simplest to most advanced audio system applications. The models include both four and eight channel low impedance 25V 70V and 100V amplifiers and provide 250W of power per channel. Network Enabled (NE) amplifiers offer ease of use full setup control and monitoring using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed. NE Series amplifiers are offered two ways; standard input with euroblock connectors and "pe" (Protea Enabled) with euroblock input connectors and world renowned Protea DSP signal processing.

The DSP library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic Parametric Notch and Shelving Equalization High- Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes Delay Compressor/Limiter Gate Ducking Auto-leveler Gain and Signal Generators (sinewave white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global parameters of an entire amplifier's control surface and DSP section.

Additionally each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations preset recall Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power standby protect network communications and each channel has a four-step signal meter bridge mono temperature and current indicators. Four-channel Mic-pre AES/EBU and Cobranet input modules will be available as options.


Features:
Eight and Four Channel Amplifiers
Ethernet control is standard
Low-Z 25V 70V and 100V Models
Extensive DSP Available
Easy and intuitive user interface
Extensive protection circuitry
Safety/Compliance: cTUVus/FCC CE (pending) RoHS
Level attenuators for each channel
Power switch can be disabled by software
4-Step Signal Level and Clip LEDs
10/100 Ethernet port
Euroblock inputs and outputs
Remote level control
Preset recall
Remote power standby
Data in and out ports

Specifications:

Power Rating 150W/Channel @ 8 Ohms
250W/Channel @ 4 Ohms
500W @ 8 Ohms Bridge Mode
Damping Factor > 250
Input Level +21dB
Input Impedance 20 kOhms, Balanced
Gain -50 to +12dB
Frequency Response 20Hz - 20kHz
Signal-to-Noise Ratio > 98dB
Total Harmonic Distortion (THD) < 0.5%
Input Connections 4 x Euroblock Inputs
1 x Ethernet Port
1 x Remote Standby Contact
1 x Preset Recall Connector
1 x Data Connector
1 x Remote Level Control Connector
1 x AC Power Input
Output Connectors 4 x Euroblock Outputs
Controls Front Panel 1 x Power Switch
4 x Channel Attenuator Knobs
Controls Rear Panel 1 x Normal/Bridge Switch
Indicators 1 x Power LED
1 x Standby LED
1 x Protect LED
1 x Power Switch Disable LED
1 x Comm LED
4 x LED Level Meters
4 x LED Temperature Meters
4 x LED Current Meters
Cooling Front-to-Rear Airflow
Dimensions (WxHxD) 19 x 3.5 x 15.5" (483 x 89 x 394mm)
Weight 21 lbs (9.5kg)


 

Loading...

Your cart